cabinet painting process

Cabinet Painting in Calgary: Our Process, Pricing & What to Expect

You like your kitchen’s layout. Your cabinets still work. But the colour or worn finish makes the whole room feel ready for a change.

Painting your existing cabinets can give your kitchen a fresh look while keeping the cabinetry you already have. The important questions are whether your cabinets are suitable, what preparation they need, and what is included in the price.

At Dow Brothers Painting, we walk you through those decisions before the work begins. Our family-owned Calgary company uses an in-house painting team, an off-site shop for doors and drawer faces, and an on-site spray setup for the fixed cabinetry. A colour consultation is included, along with a final walkthrough and a three-year workmanship warranty.

How much does cabinet painting cost?

For planning purposes, our cabinet painting projects generally fall around $3,000–$6,000 CAD, with a typical starting project budget of approximately $3,500. Smaller or simpler projects may come in closer to the lower end. Larger kitchens or projects with additional preparation can exceed this range.

These figures are a guide, rather than a fixed price for every kitchen. We price according to the cabinet box openings, doors and drawer faces, along with the preparation and other surfaces included in your project.

What changes the price?

  • The number of openings, doors and drawer faces. Each removable piece needs to be labelled, handled, prepared, sprayed and reinstalled.
  • The condition of the existing finish. Grease, surface damage and previously painted cabinets can change the preparation required.
  • The door style and details. Profiles, edges and decorative features affect the work involved.
  • The fixed surfaces. Gables—the exposed cabinet side panels—along with islands, toe kicks and other visible sections all contribute to the scope.
  • The colour and finishing requirements. The surface, chosen colour and desired finish help determine the coating system.
  • Hardware changes and additional surfaces. Filling and drilling holes and glass-front cabinetry should be discussed during the estimate. Cabinet interiors are excluded and are normally masked off.

Your written estimate identifies the surfaces and work included, so you can understand what you are comparing when reviewing quotes.

What are you paying for beyond the paint?

Much of a cabinet project happens before the finish coats go on.

There is the careful removal and tracking of doors and drawer faces, transportation to the shop, protection of your kitchen, cleaning, sanding, priming and repairing imperfections. Then come the sprayed finish coats, sanding between coats, drying time, handling and reinstallation.

Those steps serve different purposes. Cleaning removes contamination that can interfere with the new coating. Sanding prepares the surface and refines the finish between coats. Primer provides the foundation for the coating system. Masking protects the surrounding kitchen while the fixed cabinetry is sprayed.

That is why the number of paint coats alone does not tell you the whole story. The preparation and handling deserve just as much attention.

Our cabinet painting process

1. Assess your cabinets and plan the finish

We look at the cabinet material, existing coating, condition and surfaces you want included. We also discuss hardware changes and what the finished kitchen should look like.

Your included colour consultation helps you consider your cabinets alongside the countertops, backsplash, flooring and lighting that will remain. The goal is a colour that works with the whole room.

2. Remove, label and transport doors and drawer faces

We remove the cabinet doors and drawer faces, label them and transport them to our off-site shop. Keeping components organised helps us return them to their correct locations during reinstallation.

3. Protect your kitchen and create the on-site spray area

Cabinet boxes and exposed side panels stay in your home. We mask off cabinet interiors, which are not included in the painting scope, protect the surrounding surfaces and set up an enclosed on-site spray area for the fixed exterior elements.

Before work begins, we explain the access restrictions and preparation needed for your kitchen. You should plan for disruption while this area is being worked on.

4. Clean and prepare the surfaces

At the shop, doors and drawer faces are cleaned to remove grease and surface residue, then sanded and primed.

In your kitchen, we thoroughly clean the fixed cabinet surfaces to remove grease and marks and prepare them for primer. The preparation is matched to the existing surface and coating.

5. Repair imperfections and sand

After priming, we address imperfections with appropriate filler and caulking where needed, then sand to refine the surface before finishing.

We inspect throughout the process rather than waiting until the last coat. Existing wood grain and cabinet construction can influence the final appearance; we discuss those expectations during your assessment.

6. Spray two finish coats, with sanding between coats

We spray two finish coats, sanding between them. Doors and drawer faces are finished at the shop, while the fixed cabinetry is sprayed in the protected kitchen area.

Depending on the surface, colour and finish requirements, we typically use Benjamin Moore SCUFF-X or a waterborne lacquer. We select the coating for the individual project and provide care guidance for the product used.

7. Allow drying time, then reinstall

The removable pieces remain at the shop until they are ready for handling, transport and reinstallation. Doors and drawer faces are typically reinstalled about one week after removal, with timing dependent on the coating, preparation and conditions.

Ready for reinstallation does not always mean fully cured. We explain when you can begin normal use and when cleaning is appropriate for your finish.

8. Complete the final walkthrough

After the doors and drawer faces are reinstalled, we inspect the completed work and walk through it with you. This gives us an opportunity to review the finish, discuss any concerns and explain the next steps for caring for your cabinets.

Can your existing cabinets be painted?

We paint real wood, MDF and previously painted cabinetry, subject to an assessment of its condition and existing finish.

Painting is worth considering when you are happy with your kitchen layout and the cabinetry is in suitable condition. During your estimate, we look at damage and existing coating problems that may need attention before a new finish can be applied.

If your cabinets have significant damage or you want a different layout, we can discuss whether painting will achieve the result you are looking for. A colour change does not correct structural problems or change how your kitchen functions.

What surfaces can be included?

Your cabinet project can include door fronts and backs, drawer fronts, cabinet boxes, exposed ends, islands and toe kicks. Cabinet interiors are not included; they are normally masked off during spraying. Glass-front cabinetry is identified in your written scope, with the glass protected rather than painted.

Because kitchens vary, we confirm the exact surfaces in the estimate. This is particularly helpful for open shelving and decorative features that may require a different approach.

Can you change the handles or hinges?

Yes—please discuss your new hardware with us before preparation begins.

When replacement handles use the same hole spacing, the change is generally more straightforward. If the new holes will be in a clearly different location, we can assess filling the old holes and drilling new ones as part of the scope.

When a new hole would sit very close to an existing hole—for example, around a centimetre away—we recommend finding hardware that fits the existing spacing. Closely overlapping holes can make secure installation more difficult.

Replacement hinges also need compatible dimensions and mounting positions. We review the fit before proceeding, because nearby or overlapping fixing points can affect how securely a hinge attaches.

Helpful tip: Have your proposed replacement hardware available at the estimate, or send us its measurements and product details.

How long does cabinet painting take?

The work on the fixed cabinetry in your home often takes less than a week, with a few days of variation depending on kitchen size and preparation. Doors and drawer faces are finished separately at our shop and are typically reinstalled about one week after removal, give or take a day depending on the project.

These stages can overlap. We confirm the expected work period and reinstallation date for your project before starting, rather than promising every kitchen will follow the same schedule.

During the on-site spraying stage, kitchen access will be restricted. We explain what needs to be emptied or moved and how to prepare before the crew arrives.

Cabinet painting questions homeowners ask

Do you spray the cabinets or brush them?

Our process uses sprayed finish coats. Doors and drawer faces are sprayed at our off-site shop, and fixed cabinetry is sprayed within the protected on-site work area.

Are the inside surfaces of the cabinets painted?

No. Cabinet interiors are excluded from our cabinet painting scope and are normally masked off while the exterior surfaces are sprayed.

Will wood grain disappear?

A painted colour and a completely grain-free surface are different expectations. The existing material can influence the appearance. We assess your cabinets and discuss the expected texture before work begins; do not assume grain filling is included unless it appears in your estimate.

Can previously painted cabinets be repainted?

Yes, subject to inspection. The condition and adhesion of the existing coating affect the preparation and whether additional work is needed.

Is a colour consultation included?

Yes. We help you consider cabinet colours in the context of the surfaces and finishes already in your kitchen.

Is there a warranty?

We provide a three-year cabinet workmanship warranty. We review the applicable written warranty terms with you so you understand the coverage.

When can I clean the newly painted surfaces?

Follow the instructions provided for your specific coating. Reinstallation and full cure are different milestones, so avoid assuming the finish is ready for routine cleaning as soon as the doors are back on.

Do you serve communities outside Calgary?

Yes. Dow Brothers Painting serves homeowners in Calgary, Okotoks, Cochrane, Heritage Pointe, Airdrie and Chestermere.

Ready for Your Cabinets to Shine?

If you’re ready to refresh your cabinetry and achieve a beautiful, long-lasting finish, call or contact Dow Brothers Painting today. We’re proud to serve homes throughout Calgary with top-tier cabinet painting services. Let us deliver the finish you want — and the experience you deserve.

Cabinet painters in Calgary